I was heavily influenced by George Reid's classic book " Ford 351 Cleveland Engines: How to Build for Max Performance" and found the section on heads particularly interesting. George goes so far as to suggest the open chamber heads are bin worthy. And from what I am learning, there appears to be a lot of support in what he is stating. George talked about CHI heads; an Australian company that is quietly producing one of the most respected alloy heads in the world.
So, naturally, I started thinking about alternatives, such as the Aussie 2v closed chamber heads found on the 302 Cleveland. I won't bore you to tears talking about the benefits or otherwise of these heads, but the bottom line is, if I pick up a set of these heads, they are probably gonna need a freshen up anyway, so unless I can pick a set up cheaply (and they are not expensive- just getting a little hard to find nowadays) they're not really a viable option. A decent set of 2v 302 CC heads generally goes for under $500 and they're probably gonna need work.
So, then I started thinking about why those sexy looking alloy heads you find on eBay are so cheap, and a quick little fly around Google will tell you they are made in China and they are called Pro Comp heads. George Reid actually has a story to tell about these heads, and it's quite a promising one. However, a skim through YouTube (AdTube) channels will have you convinced otherwise. The main consensus I have discovered is that you should steer clear of them, even if they sell like hot cakes. At the very least, buy only a blank head and get your machinist to clean it up and fill it full of brand name goodies. Of course, once you start adding the costs up of doing that it can get very expensive.
Almost to a stage of saying, well, those CHI heads really are a decent valued item.
Here's an example of the Pro Comp heads. They are also branded as Speedmaster Heads. There is no doubt in my mind they look sexier than an old rusted out set of 4v or 2v heads. Plus they weigh a hell of a lot less and the advantages of alloy are well known. How can anyone go wrong with a head that costs $500 This particular head is the 3V variety. Specifically: Ford 302 351C Cleveland 220cc 64cc Aluminium Bare Cylinder Head
PCE281.1703 It's Chinese, and if you have ever tried to bolt Chinese stuff up, it's a hit and miss proposition. For instance, I bought a Daytona Engine Stand recently and two of the bolts just would not thread up. Had to duck down to the engineering shop and buy real bolts.
So, I am a little apprehensive with forking out money for these and finding they are nothing but shiny, lightweight boat anchors (that are not even good for boat anchors.)
They offer a complete package for the same asking price as a set of bare CHI heads.
Then, the other day, I was browsing through Facebook marketplace and found a set of bare Nason heads. These heads are apparently NOT Procomp heads, but made in store. (There is some fierce debate about this on a Facebook page in which some people are adamant these are ProComp heads. Either way, they offer a cast iron 4v head with similar configuration to the famous 4v of yore. Their website is here and a post from their Facebook page has the following information:
Decisions, decisions....
Which one should I go with?
No comments:
Post a Comment